Description:
Brand name: Eachine
Item name: E10C Mini RC Quadcopter with camera
Quadcopter Size: 60 x 60 x 28mm
Quadcopter Weight: 15g
Package Size: 12.3 x 7.5 x 8.5CM
Flight time: 5 – 6 minutes
Flight distance: about 20M
Charging time: About 35 minutes
Battery for quadcopter: 3.7V 150mah (included)
Battery for transmitter: 2 x AA battery (not included)
Camera: 2MP 720P
Features:
4 channel mini quadcopter
6-axis flight control system with adjustable gyro sensitivity
With 2.0MP camera can Video/Photograph
Up / down / left / right / side flight / hover / flip / hand launch / 360°rolling
3 flight speed mode
Low voltage alarm
Battery protection
With LED light for night flight
Memory card and card reader not included
Notice:
The screw on the back for remote controller battery compartment is not included in the package
The SD Card is not included in the package
Please turn off the quadcopter when charging
Commen Problem and The Solution:
1. Quadcopter lost connection to controller: Pull two function lever to bottom left for 3 seconds, then pull two function lever to bottom right for 3 second. Then try to mach code again(Follow Bullet points 4 );
2. Quadcopter can’t lift up: Check the propeller to make sure it was installed correctly(diagonal propellers must be the same direction );
3. Motor not spin: Check the motor to see if anything stuck the motor(hair, string, etc)
4. Package comes without spare part: Please feel free to contat us first via Amazon .com or amazon@eachine.com.
Package Included:
1 x Eachine E10C Mini RC Quadcopter With camera
1 x 2.4G transmitter
1 x 3.7V 120mah Battery
1 x USB charging cable
4 x spare blades
1 x User Manual
- With 2.0MP camera can Video/Photograph
- 3 flight speed mode and 360 degree rolling
- With LED light for night flight
- STEPS TO MATCH CODE: 1. Turn on the quadcopter then turn on the controller; 2. Push the throttle(left lever) to the top , and then pull it down; 3. When you hear a "Beep", which means the connection was set up successfully, and then you can start to fly your drone.
- Any questions, please feel free to contact us first.